Zi 字媒體

Linux 或Windows 上實現端口映射(網路 PORT轉發/轉PORT) 資料來源: https://mp.weixin.qq.com/s/nYag2lD-dgleVHbSjQ5dyQ GITHUB:https://github.com/jash-git/Jash-good-idea-20201029-001 一、Windows下實現端口映射 1. 查詢端口映射情況 netsh interface portproxy show v4tov4 2. 查詢某一個IP的所有端口映射情況 netsh interface portproxy show v4tov4 | find "[IP]" 例： netsh interface portproxy show v4tov4 | find "192.168.1.1" 3. 增加一個端口映射 netsh interface portproxy add v4tov4 listenaddress=[外网IP] listenport=[外网端口] connectaddress=[内网IP] connectport=[内网端口] 例： netsh interface portproxy add v4tov4 listenaddress=2.2.2.2 listenport=8080 connectaddress=192.168.1.50 connectport=80 4. 刪除一個端口映射 netsh interface portproxy delete v4tov4 listenaddress=[外网IP] listenport=[外网端口] 例： netsh interface portproxy delete v4tov4 listenaddress=2.2.2.2 listenport=8080 二、Linux下端口映射 1. 允許數據包轉發 echo 1 >/proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -j MASQUERADE iptables -A FORWARD -i [内网网卡名称] -j ACCEPT iptables -t nat -A POSTROUTING -s [内网网段] -o [外网网卡名称] -j MASQUERADE 例： echo 1 >/proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -j MASQUERADE iptables -A FORWARD -i ens33 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.50.0/24 -o ens37 -j MASQUERADE 2. 設置端口映射 iptables -t nat -A PREROUTING -p tcp -m tcp --dport [外网端口] -j DNAT --to-destination [内网地址]:[内网端口] 例： iptables -t nat -A PREROUTING -p tcp -m tcp --dport 6080 -j DNAT --to-destination 10.0.0.100:6090 實驗：將部署在內網的服務映射到外網(查看原文) 原文PDF